Skip to main content

How to Inject Your Medication

A step-by-step guide to injecting your Willow medication, including semaglutide, tirzepatide, sermorelin and NAD+.

E
Written by Eliza Snow

Many Willow treatments are doctor-prescribed injectable medications, given as a small injection just under the skin.

This guide walks you through how to inject your medication. Always follow your prescription label and the instructions from your Willow doctor.


Before You Begin

Here are a few important things to check before preparing your injection.

Know your dose

Check your prescription label before every injection. Draw up your dose to the exact mark your Willow doctor gives you. If you are unsure how to measure it using your syringe, ask your Willow doctor or dispensing pharmacy before you begin.

Know when to take it

Your label tells you how often to inject and whether timing matters (for example, time of day or whether to take it with food). Follow that schedule unless your Willow doctor tells you otherwise.

Keep your medications separate

If you take more than one prescription medication, keep each one in its own clearly labeled bag. Each has its own dose and schedule. Never mix two medications in the same syringe.


Injection Instructions: Step-by-Step

Step 1: Gather supplies and wash your hands

Wash your hands thoroughly. Choose a clean, well-lit surface and gather your supplies. You will need:

  • Your medication vial

  • A new sterile syringe and needle

  • Alcohol wipes

  • A cotton pad or tissue

  • A sharps container

If you feel nervous, many people find it helpful to administer their medication in a calming and cozy environment. Put on a relaxing playlist, light a candle, or pour a cup of soothing tea.

Step 2: Clean the top of the vial

Wipe the rubber top of the vial with an alcohol pad and let it air dry fully.

Step 3: Prep the syringe

  • Remove the syringe and needle caps without touching the needle.

  • If the plunger feels stiff at first, gently move it up and down a few times to break the seal and make it easier to use.

Step 4: Draw up your dose

  • Insert the needle into the vial.

  • Turn the vial upside down and slowly pull back the plunger until you reach the correct amount.

  • Tap the syringe gently to release any air bubbles, then adjust the dose if needed.

Step 5: Inject into your abdomen

  • Choose a spot on your abdomen at least two inches away from your belly button. Move and rotate the injection site with each shot. Do not inject into swollen, bruised, infected or painful skin.

  • Clean the area with an alcohol wipe and allow it to dry.

  • Pinch a small area of skin to create a fold.

  • Insert the needle into the skin at a 90-degree angle and press the plunger to administer the medication.

To avoid irritation, rotate injection sites with each shot.

Step 6: Discard the syringe in a safe place

Remove the needle and place the used syringe into a puncture proof sharps container right away.

For the safest and easiest disposal, we recommend using a needle clipper like the BD Safe-Clip.


Important Safety & Storage Notes

  • Store your medication as directed on your prescription label and pharmacy insert. Keep it in its original labeled packaging, separate from other medications and out of reach of children and pets.

  • Check the vial before each use. Do not use it if it is leaking, cloudy, discolored, contains particles or is past its beyond-use or expiration date.

  • Use a new sterile needle and syringe for every injection. Never reuse or share them.

  • Place the used needle and syringe together into a sharps container immediately after injecting. Do not detach or recap the needle. Follow local rules for disposal.

For full guidance, read our Patient Safety Information.


Have questions?

If you have any questions at all about your dose, how to measure it, your injection technique or anything you notice afterward, message your Willow doctor anytime through the patient portal. No question is too small.

Did this answer your question?